Products 1-32 of 32
Show
Availability: In stock
Item #: PDRSM2S-hardware -
Some modelers think outside the box. These are the guys who look at the incredible performance of the new breed of mini-class servo and think, "Wow, that's better than many standard size servos, what if I used these instead and saved weight?" Well now you can by using this mini-2-standard adapter, which is CNC-machined of aircraft aluminum for the purpose of installing a mini-size servo in the place of a standard-size servo. Making it convenient to fit minis into planes designed for standard...
Availability: In stock
Item #: PDRS-C007 -
Availability: In stock
Item #: AUD1012 -
Availability: In stock
Item #: PDRS60-L -
ProblemOccasionally you'll find yourself in a situation where the loads on your servo result in displacement of the output shaft. Since this loading leads the servo to rock fore-and-aft longitudinally on the rubber isolation mounts, this results in lost motion. What you sense in flight is a rather less than locked-in feel.SolutionA simple fix involves placing a bridge across the top of the servo, which along with a ball bearing supported output shaft, stabilizes the servo assembly on its...
Availability: In stock
Item #: PDRS60-T -
ProblemOccasionally you'll find yourself in a situation where the loads on your servo result in displacement of the output shaft. Since this loading leads the servo to rock side-to-side transversely on the rubber isolation mounts, this results in lost motion. What you sense in flight is a rather less than locked-in feel.SolutionA simple fix involves placing a bridge across the top of the servo, which along with a ball bearing supported output shaft, stabilizes the servo assembly on its...
Availability: In stock
Item #: S7749P -
This S7749P polymer servo mount adapter plus horn kit is for installing a series II standard-size servo DS635/845/1155BLHV into a Traxxas X-MAXX. This will not work with series I servos, like DS505/630/930BLHV (or compatible like Savox 2290SG). Instead, order control horn PDRS19F-25T, and Traxxas' polymer mount adapter, #7749. Heads up . . . our alloy series II installation kit is a smarter buy. The alloy-kit is both stronger 'and' significantly more rigid, 'but' it's only for series II super...
Availability: In stock
Item #: S7749 -
This S7749 is the polymer servo adapter only for the DS635/845/1155BLHV servo being installed into an X-MAXX.
Availability: In stock
Item #: S7749A -
This mechanical kit is for fitting ProModeler DS635/845 or DS1155 standard size servos to an X-MAXX. This does not fit other brand servos and is not for sale separately. Kit includes mount adapters, servo horn, and hardware. Background: With the X-MAXX, Traxxas unleashed a beast on the modeling world. As delivered, it's a great introduction to the sport, but skilled drivers soon discover the limits of the stock steering servo. While Traxxas offer metal gear upgrades, they ultimately responded...
Availability: In stock
Item #: PDRS-CM-10 -
Servo mounts, set, qty 4, includes - rubber isolators, brass eyelet, mounting screws, plus servo arm screw. Note; the rubber for these dry out and get hard over time due to ozone in the atmosphere. I replace the ones in my own models about every two years as part of my winter maintenance cycle - heads up! That's when you order PDRS-CM-11-micro, which are just the rubber bits.
Availability: Out of Stock
Item #: PDRSM-submicro -
At last! Now, when your aircraft's structure allows (or begs you) to side mount the servos, this sidemount kit makes your life easy! Created by ProModeler, this is how you get professional results without adding much in the way of weight, or risking your model's control integrity to old fashioned hardwood blocks and glue. CNC-machined from a solid billet of 7075-T6 aircraft aluminum (and hogged out to reduce all possible weight), it incorporates four mounting screws (tapped M2 and supplied...
Availability: In stock
Item #: PDRS-CM-11 -
Servo mounts, rubber isolators, qty 4, does not include brass eyelet or mounting screw. These dry out and get hard over time due to ozone in the atmosphere. I replace the ones in my own models about every two years as part of my winter maintenance cycle.
Availability: In stock
Item #: PDRS-CM-20 -
Servo mounts, set, qty 4, includes - rubber isolators, brass eyelet, mounting screws, plus servo arm screw. Note; the rubber for these dry out and get hard over time due to ozone in the atmosphere. I replace the ones in my own models about every two years as part of my winter maintenance cycle - heads up! That's when you order PDRS-CM-21-mini, which are just the rubber bits.
Availability: In stock
Item #: PDRS2020 -
Unlike competitors, we have these servo-mounting screws custom forged right here in the USA. While there are 4 in a pack (enough for one servo), they're also available in quantities of 25, 100, and even 1000 (for professionals builders) because they're useful for a lot of other stuff like mounting cowls, landing gear straps, etc. What motivated us to make these? I was installing servos using a long skinny Phillips head screwdriver. It slipped off and punched a neat hole through the top of the...
Availability: Out of Stock
Item #: PDRSM-micro -
At last! Now, when your aircraft's structure allows (or begs you) to side mount the servos, this sidemount kit makes your life easy! Created by ProModeler, this is how you get professional results without adding much in the way of weight, or risking your model's control integrity to old fashioned hardwood blocks and glue. CNC-machined from a solid billet of 7075-T6 aircraft aluminum (and hogged out to reduce all possible weight), it incorporates four mounting screws (tapped M2 and supplied...
Availability: In stock
Item #: PDRS-CM-21 -
Servo mounts, rubber isolators, qty 4, does not include brass eyelet or mounting screw. These dry out and get hard over time due to ozone in the atmosphere. I replace the ones in my own models about every two years as part of my winter maintenance cycle.
Availability: In stock
Item #: PDRS03SW -
M3 star washers, pack 10 - useful for added security against vibration with any M3 fastener (doesn't include the servo-screw depicted in the photo).
Availability: In stock
Item #: PDRS-CM-30 -
Servo mounts, set, qty 4, includes - rubber isolators, brass eyelet, mounting screws, plus servo arm screw. Note; the rubber for these dry out and get hard over time due to ozone in the atmosphere. I replace the ones in my own models about every two years as part of my winter maintenance cycle - heads up! That's when you order PDRS-CM-31-standard, which are just the rubber bits.
Availability: Out of Stock
Item #: PDRSM-mini -
At last! Now, when your aircraft's structure allows (or begs you) to side mount the servos, this sidemount kit makes your life easy! Created by ProModeler, this is how you get professional results without adding much in the way of weight, or risking your model's control integrity to old fashioned hardwood blocks and glue. CNC-machined from a solid billet of 7075-T6 aircraft aluminum (and hogged out to reduce all possible weight), it incorporates four mounting screws (tapped M2 and supplied...
Availability: In stock
Item #: PDRS-CM-31 -
Servo mounts, rubber isolators, qty 4, does not include brass eyelet or mounting screw. These dry out and get hard over time due to ozone in the atmosphere. I replace the ones in my own models about every two years as part of my winter maintenance cycle.
Availability: In stock
Item #: PDRS-CM-40 -
Servo mounts, set, qty 4, includes - rubber isolators, brass eyelet, mounting screws, plus servo arm screw.
Availability: Out of Stock
Item #: PDRSM-standard -
At last! Now, when your aircraft's structure allows (or begs you) to side mount the servos, this sidemount kit makes your life easy! Created by ProModeler, this is how you get professional results without adding much in the way of weight, or risking your model's control integrity to old fashioned hardwood blocks and glue. CNC-machined from a solid billet of 7075-T6 aircraft aluminum (and hogged out to reduce all possible weight), it incorporates four mounting screws (tapped M2 and supplied...
Availability: In stock
Item #: PDRS-CM-50 -
Servo mounts, set, qty 4, includes - rubber isolators, brass eyelet, mounting screws, plus servo arm screw.
Availability: In stock
Item #: PDRS3055BH -
M3x5.5mm Button Head Allen bolt - click the pull down menu for quantities of 1, 5, 25, 100, or 1000. These are used with type servo horns like PDRS101. There is a blue patch of thread locker pre-applied for your convenience.
Availability: In stock
Item #: PDRS3055PH -
M3x5.5mm Phillips Head bolt - click the pull down menu for quantities of 1, 5, 25, 100, or 1000. These are used with type servo horns like PDRS101 when Phillips Head is preferred to Allen Head.
Availability: In stock
Item #: PDRS3006PH -
M3x6mm Phillips Head Allen bolt - click the pull down menu for quantities of 1, 5, 25, 100, or 1000. These are used with type servo horns like PDRS101 when Phillips Head is preferred to Allen Head.
Availability: In stock
Item #: PDRS3008BH -
M3x8mm Button Head Allen bolt - click the pull down menu for quantities of 1, 5, 25, 100, or 1000. These are used with type servo horns like PDRS101 when something longer than the stock 5.5 is desired. There is a blue patch of thread locker pre-applied for your convenience.
Availability: In stock
Item #: PDRS3010BH -
M3x10mm Button Head Allen bolt - click the pull down menu for quantities of 1, 5, 25, 100, or 1000. These are used with type F-servo horns like PDRS19F-25T, and similar fork-arms. There is a blue patch of thread locker pre-applied for your convenience.
Availability: In stock
Item #: PDRSM2S -
Some modelers think outside the box. These are the guys who look at the incredible performance of the new breed of mini-class servo and think, "Wow, that's better than many standard size servos, what if I used these instead and saved weight?" Well now you can by using this mini-2-standard adapter, which is CNC-machined of aircraft aluminum for the purpose of installing a mini-size servo in the place of a standard-size servo. Making it convenient to fit minis into planes designed for standard...
Availability: In stock
Item #: PDRS905-swing -
Cross beam swing is used with the DS905BLWR servo in motion control applications. Cross Beam Swing Conceptually simple, beams and wheels sets are the foundation of making tricky adaptations. But what if you need to pivot and load, both? Enter the Cross Beam Swing accessory! Combining both a mount and an output arm, one which is concentrically supported 180°from the output, this may be one of the most time saving accessories ever created in the motion control world. So is 'this' the best way to...
Availability: In stock
Item #: XXbeam -
While designed for the specific purpose of fitting into an X-MAXX, the DS1885BLDP is quite an impressive specimen as servos go (ditto the -M variant for fitting to an XRT). Outfitting either with beam-mounts (like those of DS1505, DS1735, DS2180, and DS2685), gives you the added benefit of versatility because then you can repurpose this specialized form factor for another application.Included are two bolt-on beam mounts, which CNC-machined from a solid billet of 6061-T6 aircraft aluminum. Also...
Availability: In stock
Item #: PDRS905-wheels -
Wheel sets are used to harness the output of cross-shaft servos like the DS905BLWR. Wheels Once mounted, making use of the output is a matter of adapting the shaft to what best suits your needs. Sometimes a conventional arm or horn (of which we offer many in both polymer and aluminum) is all that's needed. However, the selection criteria that sees most using a counter-shaft equipped servo is to balance the output. At its most basic, we offer a set of drive wheels. As long as you have the...
Availability: In stock
Item #: PDRS905-beam -
Multi-mount beams are packaged individually to make attaching to the DS905BLWR servo easier for motion control applications. Multi-mount BeamsSince it's impossible to predict the purpose government or industry may put this motion unit to, we've created the multi-mount beam. This nifty little accessory offers a wide spectrum of mounting possibilities because of how the case is tapped on four sides. Whether one is enough, or you need a pair( or four), the point of this bit of hardware is to make...