Extensions

There are two principal uses for a glitch buster, adding capacitance when you add impedance with a servo extension, and to help with voltage drops. Basically, whenever you use an extension longer than 24" it's wise to add capacitance at the load because the extension adds impedance. Far and away the easiest way to add capacitance is in combination with a Y-harness. Simply plug both the capacitor and the servo into the Y-harness and then plug the Y-harness into your extension. A spot of Goop...

This 4" long servo extension,weighs 4g and terminates with male and female ABS plastic 5A-type universal radio connectors with crimped gold-plated metal pins on 0.10" centers.

This 6in/150mm (nominal) servo extension, weighs 4g and terminates with male and female ABS plastic 5A-type universal radio connectors with crimped gold-plated metal pins on 0.10" centers.

This 6" long servo extension,weighs 6g and terminates with male and female ABS plastic 5A-type universal radio connectors with crimped gold-plated metal pins on 0.10" centers.

This 10in/225mm (nominal) servo extension, weighs 7g and terminates with male and female ABS plastic 5A-type universal radio connectors with crimped gold-plated metal pins on 0.10" centers.

This 12in/300mm (nominal) servo extension, weighs 8g and terminates with male and female ABS plastic 5A-type universal radio connectors with crimped gold-plated metal pins on 0.10" centers.

This 17in/425mm (nominal) servo extension, weighs 11g and terminates with male and female ABS plastic 5A-type universal radio connectors with crimped gold-plated metal pins on 0.10" centers.

This 24in/600mm (nominal) servo extension, weighs 14g and terminates with male and female ABS plastic 5A-type universal radio connectors with crimped gold-plated metal pins on 0.10" centers.

This 38in/950mm (nominal) servo extension, weighs 19g and terminates with male and female ABS plastic 5A-type universal radio connectors with crimped gold-plated metal pins on 0.10" centers.

Have you got an X-MAXX with a 6V radio and want to use a HV servo? Now you can without buying a pricey new HV radio system. This 10A power-adapter isolates a 2S battery pack (7.4-8.4V) for powering the servo while at the same time leaving the receiver to be powered by the 6V BEC circuit (through the throttle connection from the ESC).Now, instead of buying an expensive new HV-capable radio system, you can continue to use the perfectly serviceable stock radio while gaining the benefit of a super...