Products 1-48 of 213
Show
Adapter, M2S, hardware
Price: $2.99
Availability: In stock
Item #: PDRSM2S-hardware -

Some modelers think outside the box. These are the guys who look at the incredible performance of the new breed of mini-class servo and think, "Wow, that's better than many standard size servos, what if I used these instead and saved weight?" Well now you can by using this mini-2-standard adapter, which is CNC-machined of aircraft aluminum for the purpose of installing a mini-size servo in the place of a standard-size servo. Making it convenient to fit minis into planes designed for standard...

Bearing, case, standard
Price: $7.99
Availability: In stock
Item #: PDRS-SBB-1 -

Ball bearings, case, standard, qty 1 each

Bearing, case, Std series II - Midi
Price: $9.99
Availability: In stock
Item #: PDRS-SBB-2 -

Ball bearings, case, standard, qty 1 each

Case, Mounting, eyelet only (Set of 4)
Price: $4.99
Availability: In stock
Item #: PDRS-C007 -

Case, Pigtail
Price: $2.99
Availability: In stock
Item #: PDRS-Case-Pigtail -

Grease, Gears, Servo
Price: $3.99
review-star review-star review-star review-star review-star
(1)
Availability: In stock
Item #: PDRS-Grease -

O-ring, case, micro
Price: $0.89
Availability: In stock
Item #: PDRS-CO-3 -

O-ring, case, mini
Price: $0.94
Availability: In stock
Item #: PDRS-CO-2 -

O-ring, case, standard
Price: $0.99
Availability: In stock
Item #: PDRS-CO-1 -

O-ring, M2, assembly bolts (Standard/Mini)
Price: $0.20
Availability: In stock
Item #: PDRS-CO-6 -

This is for a single o-ring. Please order the quantity you need.

O-ring, M5, output shaft (Micro)
Price: $0.94
Availability: In stock
Item #: PDRS-CO-5 -

This is for a single o-ring. Please order the quantity you need.

O-ring, M6, output shaft (Standard/Mini)
Price: $0.99
Availability: In stock
Item #: PDRS-CO-4 -

This is for a single o-ring. Please order the quantity you need.

Rebuild kit, case, standard
Price: $19.99
Availability: In stock
Item #: PDRS-SRB.1 -

Rebuild kit, standard-size; includes two ball bearings, 10 o-rings. Basically, these are the parts for refurbishing the seals and bearings.

Servo Mount Boss Set
Price: $4.99
Availability: In stock
Item #: AUD1012 -

Stabilizer, output shaft, longitudinal
Price: $13.99
Availability: In stock
Item #: PDRS60-L -

ProblemOccasionally you'll find yourself in a situation where the loads on your servo result in displacement of the output shaft. Since this loading leads the servo to rock fore-and-aft longitudinally on the rubber isolation mounts, this results in lost motion. What you sense in flight is a rather less than locked-in feel.SolutionA simple fix involves placing a bridge across the top of the servo, which along with a ball bearing supported output shaft, stabilizes the servo assembly on its...

Stabilizer, output shaft, transverse
Price: $12.99
Availability: In stock
Item #: PDRS60-T -

ProblemOccasionally you'll find yourself in a situation where the loads on your servo result in displacement of the output shaft. Since this loading leads the servo to rock side-to-side transversely on the rubber isolation mounts, this results in lost motion. What you sense in flight is a rather less than locked-in feel.SolutionA simple fix involves placing a bridge across the top of the servo, which along with a ball bearing supported output shaft, stabilizes the servo assembly on its...

X-Maxx  STD-poly
Price: $29.99
Availability: In stock
Item #: S7749P -

This S7749P polymer servo mount adapter plus horn kit is for installing a series II standard-size servo DS635/845/1155BLHV into a Traxxas X-MAXX. This will not work with series I servos, like DS505/630/930BLHV (or compatible like Savox 2290SG). Instead, order control horn PDRS19F-25T, and Traxxas' polymer mount adapter, #7749. Heads up . . . our alloy series II installation kit is a smarter buy. The alloy-kit is both stronger 'and' significantly more rigid, 'but' it's only for series II super...

X-MAXX mount, poly
Price: $14.99
Availability: In stock
Item #: S7749 -

This S7749 is the polymer servo adapter only for the DS635/845/1155BLHV servo being installed into an X-MAXX.

X-Maxx STD-alloy
Price: $39.99
Availability: In stock
Item #: S7749A -

This mechanical kit is for fitting ProModeler DS635/845 or DS1155 standard size servos to an X-MAXX. This does not fit other brand servos and is not for sale separately. Kit includes mount adapters, servo horn, and hardware. Background: With the X-MAXX, Traxxas unleashed a beast on the modeling world. As delivered, it's a great introduction to the sport, but skilled drivers soon discover the limits of the stock steering servo. While Traxxas offer metal gear upgrades, they ultimately responded...

Lead, Servo, 22AWG
Price: $12.99
Availability: In stock
Item #: PDRS-Lead -

Have your servo got a mangled lead? This 22AWG replacement has the correct crimped connector on one end, while the other has been pre-tinned - making it ready to be soldered to the PCB (printed circuit board). For your convenience, this lead also Includes the rubber boot so you may effect a totally professional repair.

Case, Mounting Set, micro
Price: $0.99
Availability: In stock
Item #: PDRS-CM-10 -

Servo mounts, set, qty 4, includes - rubber isolators, brass eyelet, mounting screws, plus servo arm screw. Note; the rubber for these dry out and get hard over time due to ozone in the atmosphere. I replace the ones in my own models about every two years as part of my winter maintenance cycle - heads up! That's when you order PDRS-CM-11-micro, which are just the rubber bits.

Case, Mounting Rubber, micro
Price: $0.99
Availability: In stock
Item #: PDRS-CM-11 -

Servo mounts, rubber isolators, qty 4, does not include brass eyelet or mounting screw. These dry out and get hard over time due to ozone in the atmosphere. I replace the ones in my own models about every two years as part of my winter maintenance cycle.

Case, Mounting Set, mini
Price: $4.99
Availability: In stock
Item #: PDRS-CM-20 -

Servo mounts, set, qty 4, includes - rubber isolators, brass eyelet, mounting screws, plus servo arm screw. Note; the rubber for these dry out and get hard over time due to ozone in the atmosphere. I replace the ones in my own models about every two years as part of my winter maintenance cycle - heads up! That's when you order PDRS-CM-21-mini, which are just the rubber bits.

Screw, Servo, #2x3/4"
Price: $1.99
review-star review-star review-star review-star review-star
(1)
Availability: In stock
Item #: PDRS2020 -

Unlike competitors, we have these servo-mounting screws custom forged right here in the USA. While there are 4 in a pack (enough for one servo), they're also available in quantities of 25, 100, and even 1000 (for professionals builders) because they're useful for a lot of other stuff like mounting cowls, landing gear straps, etc. What motivated us to make these? I was installing servos using a long skinny Phillips head screwdriver. It slipped off and punched a neat hole through the top of the...

Case, Mounting Rubber, mini
Price: $0.99
Availability: In stock
Item #: PDRS-CM-21 -

Servo mounts, rubber isolators, qty 4, does not include brass eyelet or mounting screw. These dry out and get hard over time due to ozone in the atmosphere. I replace the ones in my own models about every two years as part of my winter maintenance cycle.

Washer, Star, M3 (10)
Price: $1.99
Availability: In stock
Item #: PDRS03SW -

M3 star washers, pack 10 - useful for added security against vibration with any M3 fastener (doesn't include the servo-screw depicted in the photo).

Case, Mounting Set, standard
Price: $4.99
Availability: In stock
Item #: PDRS-CM-30 -

Servo mounts, set, qty 4, includes - rubber isolators, brass eyelet, mounting screws, plus servo arm screw. Note; the rubber for these dry out and get hard over time due to ozone in the atmosphere. I replace the ones in my own models about every two years as part of my winter maintenance cycle - heads up! That's when you order PDRS-CM-31-standard, which are just the rubber bits.

Case, Mounting Rubber, standard
Price: $0.99
Availability: In stock
Item #: PDRS-CM-31 -

Servo mounts, rubber isolators, qty 4, does not include brass eyelet or mounting screw. These dry out and get hard over time due to ozone in the atmosphere. I replace the ones in my own models about every two years as part of my winter maintenance cycle.

Case, Mounting Set, quarter
Price: $4.99
Availability: In stock
Item #: PDRS-CM-40 -

Servo mounts, set, qty 4, includes - rubber isolators, brass eyelet, mounting screws, plus servo arm screw.

Case, Mounting Set, quarter
Price: $9.99
Availability: In stock
Item #: PDRS-CM-50 -

Servo mounts, set, qty 4, includes - rubber isolators, brass eyelet, mounting screws, plus servo arm screw.

Screw, Horn, 5.5mm, Button
Price: $1.99
Availability: In stock
Item #: PDRS3055BH -

M3x5.5mm Button Head Allen bolt - click the pull down menu for quantities of 1, 5, 25, 100, or 1000. These are used with type servo horns like PDRS101. There is a blue patch of thread locker pre-applied for your convenience.

Screw, Horn, 5.5mm, Phillips
Price: $1.99
Availability: In stock
Item #: PDRS3055PH -

M3x5.5mm Phillips Head bolt - click the pull down menu for quantities of 1, 5, 25, 100, or 1000. These are used with type servo horns like PDRS101 when Phillips Head is preferred to Allen Head.

Screw, Horn, 6mm, Phillips
Price: $1.99
Availability: In stock
Item #: PDRS3006PH -

M3x6mm Phillips Head Allen bolt - click the pull down menu for quantities of 1, 5, 25, 100, or 1000. These are used with type servo horns like PDRS101 when Phillips Head is preferred to Allen Head.

Case (DS75CLHV), plastic, 1-pc
Price: $18.99
Availability: In stock
Item #: PDRS75CLHV-1 -

Polymer upper case component only - does not include polymer middle or bottom sections, aluminum center section, o-rings, label, or fasteners.

Gearset, DS75CLHV
Price: $19.99
Availability: In stock
Item #: Gearset-DS75CLHV -

Hot Section, electronics, DS75
Price: $24.99
Availability: In stock
Item #: PDRS-HS75 -

So you've got a dead servo and wonder; can it be repaired economically? When it involves your CL-series servo, in most cases the answer is yes because the mechanical and electrical components of these servos are so robust they're almost never damaged. But in the event of damage we can fix it so it works like new again. Bottom line? Buy this, then return the servo to; ProModeler RMA: use your order number 2255 Pine Way Sanford, FL 32773 . . . and we'll quickly replace the lead, PCB, motor, and...

Screw, Horn, 8mm, Button
Price: $2.49
Availability: In stock
Item #: PDRS3008BH -

M3x8mm Button Head Allen bolt - click the pull down menu for quantities of 1, 5, 25, 100, or 1000. These are used with type servo horns like PDRS101 when something longer than the stock 5.5 is desired. There is a blue patch of thread locker pre-applied for your convenience.

Case (DS085BLHV), CNC-aluminum, 3-pc set
Price: $69.99
Availability: Out of Stock
Item #: PDRS085BLHV-1 -

3-piece aluminum case components only - does not include o-rings, label, or fasteners. Must be returned for service.

Case, label, DS085BLHV
Price: $2.99
Availability: In stock
Item #: PDRS85BL.3 -

Hot Section, electronics, DS85
Price: $62.99
Availability: In stock
Item #: PDRS-HS85 -

So you've got a dead servo and wonder; can it be repaired economically? When it involves your BL-series servo, in most cases the answer is yes because the mechanical and electrical components of these servos are so robust they're almost never damaged. But in the event of damage we can fix it so it works like new again. Bottom line? Buy this, then return the servo to; ProModeler RMA: use your order number 2255 Pine Way Sanford, FL 32773 . . . and we'll quickly replace the lead, PCB, motor, and...

Potentiometer, 085BLHV
Price: $24.99
Availability: In stock
Item #: PDRS85BL-5 -

Servo Motor, 085BLHV
Price: $29.99
Availability: In stock
Item #: PDRS85BL.4 -

Gearset, DS90DLHV
Price: $24.99
Availability: In stock
Item #: Gearset-DS90DLHV -

Gearset, Steel, DS90DLHV
Price: $29.99
Availability: In stock
Item #: Gearset-Steel-DS90DLHV -

Hot Section, electronics, DS90
Price: $19.99
Availability: In stock
Item #: PDRS-HS90 -

So you've got a dead servo and wonder; can it be repaired economically? When it involves your DL-series servo, in most cases the answer is yes because the mechanical and electrical components of these servos are so robust they're almost never damaged. But in the event of damage we can fix it so it works like new again. Bottom line? Buy this, then return the servo to; ProModeler RMA: use your order number 2255 Pine Way Sanford, FL 32773 . . . and we'll quickly replace the lead, PCB, motor, and...

Case (DS100DLHV), plastic, 1-pc
Price: $24.99
Availability: In stock
Item #: PDRS100DLHV-1 -

Polymer upper case component only - does not include polymer middle or bottom sections, aluminum center section, o-rings, label, or fasteners.

Gearset, DS100DLHV
Price: $19.99
Availability: In stock
Item #: Gearset-DS100DLHV -

Hot Section, electronics, DS100
Price: $24.99
Availability: In stock
Item #: PDRS-HS100 -

So you've got a dead servo and wonder; can it be repaired economically? When it involves your DL-series servo, in most cases the answer is yes because the mechanical and electrical components of these servos are so robust they're almost never damaged. But in the event of damage we can fix it so it works like new again. Bottom line? Buy this, then return the servo to; ProModeler RMA: use your order number 2255 Pine Way Sanford, FL 32773 . . . and we'll quickly replace the lead, PCB, motor, and...