Servo Stuff

Products 1-24 of 30
Show
Adapter, Mini-standard
Price: $4.99
Availability: In stock
Item #: PDRSM2S -

Some modelers think outside the box. These are the guys who look at the incredible performance of the new breed of mini-class servo and think, "Wow, that's better than many standard size servos, what if I used these instead and saved weight?" Well now you can by using this mini-2-standard adapter, which is CNC-machined of aircraft aluminum for the purpose of installing a mini-size servo in the place of a standard-size servo. Making it convenient to fit minis into planes designed for standard...

Glitch Buster
Price: $4.99
Availability: In stock
Item #: PDRSGB -

Concerned regarding voltage drops due to using high power servos? While a power compensator is often called a glitch buster, what's actually happening is the current draw temporarily exceeds the capability of the power subsystem (typically the regulating circuit within an ECS called a BEC). When the BEC is overwhelmed, e.g. unable to supply adequate voltage to your servos, you experience a hesitation, what is referred to as a glitch because control is momentarily affected, or lost. And instead...

Servo Mount Boss Set
Price: $4.99
Availability: In stock
Item #: AUD1012 -

Servo, reverser
Price: $9.99
Availability: In stock
Item #: PDRS-reverser -

Sometimes you need to reverse a servo and doing it within the radio isn't convenient, or easy. And you don't feel like opening your servo to unsolder and reverse the leads on the motor and potentiometer. Enter the ProModeler PDRS-reverser to make your life easier.

Y-Harness
Price: $4.99
(1)
Availability: In stock
Item #: PDRS-Y-Harness -

Output Shaft Stabilizer (qty 3 servos)
Price: $29.99
Availability: In stock
Item #: AUD0060 -

Contents: sufficient for the 3 cyclic servos controlling the swashplate.1) AUD1011-2 Servo Boss 3) Bridges 3) Bearings 3) AUD3068MT-30 Output Shafts 6) AUD2010AH boltsThese output shaft stabilizers secure motion of the servo, e.g. prevent them from rocking side-to-side on the mounting dampers (this, due to feedback forces from the main rotors back into the servos, e.g. from the flight forces).- Stabilizer 1 - Pitch Servo- Stabilizer 2 - Roll Servo- Stabilizer 3 - Elevator Servo ...

Extension, Servo, 22AWG, 4"
Price: $2.99
Availability: In stock
Item #: DS22AWG4EXT -

This 4" long servo extension,weighs 6g and terminates with male and female ABS plastic 5A-type universal radio connectors with crimped gold-plated metal pins on 0.10" centers.

Extension, Servo, 22AWG, 6"
Price: $3.49
Availability: In stock
Item #: DS22AWG6EXT -

This 6" long servo extension,weighs 7g and terminates with male and female ABS plastic 5A-type universal radio connectors with crimped gold-plated metal pins on 0.10" centers.

Extension, Servo, 20AWG, 18"
Price: $4.99
Availability: Out of Stock
Item #: DS20AWG18EXT -

This 18" long servo extension,weighs 14g and terminates with male and female ABS plastic 5A-type universal radio connectors with crimped gold-plated metal pins on 0.10" centers.

Extension, Servo, 20AWG, 36"
Price: $5.99
Availability: In stock
Item #: DS20AWG36EXT -

This 36" long servo extension,weighs 23g and terminates with male and female ABS plastic 5A-type universal radio connectors with crimped gold-plated metal pins on 0.10" centers.

Extension, Servo, 20AWG, 48"
Price: $6.49
Availability: In stock
Item #: DS20AWG48EXT -

This 48" long servo extension,weighs 29g and terminates with male and female ABS plastic 5A-type universal radio connectors with crimped gold-plated metal pins on 0.10" centers.

Screw, Servo, #2x3/4"
Price: $1.99
(1)
Availability: In stock
Item #: PDRS2020 -

Unlike competitors, we have these servo-mounting screws custom forged right here in the USA. While there are 4 in a pack (enough for one servo), they're also available in quantities of 25, 100, and even 1000 (for professionals builders) because they're useful for a lot of other stuff like mounting cowls, landing gear straps, etc. What motivated us to make these? I was installing servos using a long skinny Phillips head screwdriver. It slipped off and punched a neat hole through the top of the...

Screw, Servo, Arm
Price: $1.99
Availability: In stock
Item #: PDRS3055BH -

Supplied 2 in a pack, click the pull down menu for quantities of 25, 100, 1000.These are the best screws available for securing the servo-arm to the splined output-shaft of metal gear servos because they're Made in the USA of high strength grade 10.9 alloy steel and have a blue patch of thread-locker preapplied (for vibration resistance).Competitors and experienced customers alike know ProModeler include the industry's best servo mounting-screws (#2x3/4" Allen head - https://www.promodeler.com/...

Arm, servo, 12-24mm
Price: $0.99
(3)
Availability: In stock
Item #: PDRS101 -

Made of heavy duty plastic (technically a fiber-filler engineering polymer like is found in 9mm handgun frames), this tough servo horn is suitable up to 630oz-in. Dimensions: ø6mm, 25-spline (Futaba-compatible) 1st bore: 12mm2nd bore: 15mm3rd bore: 18mm4th bore: 21mm5th bore: 24mm

Arm, servo, 23-49mm
Price: $1.99
(3)
Availability: In stock
Item #: PDRS102 -

Made of heavy duty plastic (technically a fiber-filler engineering polymer like is found in 9mm handgun frames), this tough double-arm servo horn is suitable up to 400oz-in.Dimensions: ø6mm, 25-spline (Futaba-compatible)1st bore pair across: 24mm2nd bore pair across: 30mm3rd bore pair across: 37mm4th bore pair across:43mm5th bore pair across: 49mm

Arm, servo, 15-20mm
Price: $1.99
Availability: In stock
Item #: PDRS105 -

Made of heavy duty plastic (technically a fiber-filler engineering polymer like is found in 9mm handgun frames), this super tough servo horn is ideal for use in steering mechanism of RC trucks - suitable for servos up to 630oz-in. Dimensions: ø6mm, 25-spline (Futaba-compatible) 1st bore: 15mm2nd bore: 20mm Nothing is unbreakable. Least of all a servo - ours or anybody's. Yet we see guys attempting to create an unbreakable truck by replacing plastic components with aluminum ones - and the first...

21mm diameter servo horn
Price: $1.99
Availability: In stock
Item #: PDRS107 -

21mm in OD, the round servo-horn is often referred to as a wheel-arm. Injection molded in rugged nylon 6.6, which is a type of heavy duty plastic (fiber-filler engineering polymer), this is the same stuff used in 9mm handgun frames because it's so tough. Simple in appearance but complex in execution (what makes making these actually rather pricey), the molding for this arm has a total of 13 bores (that's what we call them, but everybody else calls them holes). Of course, there's one on center...

Arm, servo, 10-20mm
Price: $7.99
Availability: Out of Stock
Item #: PDRS201 -

Often used for crawlers (steering), helicopters (cyclic), and model airplanes (throttle, aileron, elevators, and flaps), this servo arm is CNC machined from a solid billet of 6061-T6 aircraft aluminum. Working to its strengths, it's slender vs. bulky to optimize strength at the expense of mass (less bulk means less force wasted accelerating dead weight). Have you ever heard how cars are designed with crumple zones to protect occupants? This ProModeler servo arm is similarly designed, e.g. the...

Arm, servo, 1-3/4"
Price: $8.99
(1)
Availability: Out of Stock
Item #: PDRS202 -

This 2" long servo arm is CNC-machined from a solid billet of 6061-T6 aircraft aluminum then red anodized. Broached to fit 25T, it fits ProModeler and Futaba servos. Perfect for heavy duty applications whenever you need a lot of throw, it features a dual cinching M2 Allen head machine-bolts to help snug it to the splines (for extreme flight loads). Drilled and tapped for 4-40 threads in three locations, these are a great addtion to your model.Dimensions: 25-spline (Futaba-compatible)1st hole:...

Arm, servo, 10-20mm
Price: $8.99
Availability: Out of Stock
Item #: PDRS203 -

Often used for high horsepower hydros (boats), big tire crawlers (trucks), cyclic-duty (helicopters), and even the odd model airplanes (aileron, elevators, and flaps on fast movers like jets), this single-horn servo arm is short and stout (and somewhat reminiscent of a fire plug). CNC-machined from a solid billet of 6061-T6 aircraft aluminum, its bulky look tells the full story because it's really, really strong! With two M2-Allen head machine-thread Grade 12.9 bolts for clamping the...

Arm, servo, 3-3/4"
Price: $9.99
(1)
Availability: In stock
Item #: PDRS204 -

This polished aluminum giant-scale double-side servo arm is red anodized and laser etched after being CNC-machined from a solid billet of 6061 T6 aircraft aluminum. Broached to fit ProModeler (and Futaba) servos (25-splines), this unit is perfect for heavy duty applications like the rudder because because it features dual clamps to help secure the servo arm to the splines (necessary for extreme flight loads). Drilled and tapped for 4-40 threads, this is a smart choice when high flight loads...

Arm, servo, Fork
Price: $17.99
Availability: In stock
Item #: PDRS209-ARM-ONLY -

This is the ProModeler control arm/servo package for replacing the stock arm/servo in your X-MAXX when using the Traxxas #7749 servo adapter. The benefit is retaining the bearing supporting the output shaft - nice! The arm is also available as part of a servo-package with the DS930BLHV.https://www.promodeler.com/DS930BLHVThis high voltage brushless servo is housed within a case CNC-machined from a solid billet of 6061-T6 aircraft aluminum and has steel gears. Anyway, we just want you to know...

Arm, servo, ForkDS630
Price: $169.99
(4)
Availability: In stock
Item #: PDRS209-630 -

This is the ProModeler control arm/servo package for replacing the stock arm/servo in your X-MAXX when using the Traxxas #7749 servo adapter that replaces the stock unit with a 630oz-in brushless high voltage all-alloy steel gear train high performance servo. The arm is part of a servo-package. Both it and the servo are CNC-machined from a solid billet of 6061-T6 aircraft aluminum. The arm is anodized red (there are loads of YouTube videos showing the oven cleaner method of removing the color...

Arm, servo, ForkDS930
Price: $199.99
Availability: In stock
Item #: PDRS209-930 -

This is the ProModeler control arm/servo package for replacing the stock arm/servo in your X-MAXX when using the Traxxas #7749 servo adapter that replaces the stock unit with a 930oz-in brushless high voltage all-alloy steel geartrain high performance servo. The arm is part of a servo-package. Both it and the servo are CNC-machined from a solid billet of 6061-T6 aircraft aluminum. The arm is anodized red (there are loads of YouTube videos showing the oven cleaner method of removing the color...