Contents: sufficient for the 3 cyclic servos controlling the swashplate.
- 1) AUD1011-2 Servo Boss
- 3) Bridges
- 3) Bearings
- 3) AUD3068MT-30 Output Shafts
- 6) AUD2010AH bolts
These output shaft stabilizers secure motion of the servo, e.g. prevent them from rocking
side-to-side on the mounting dampers (this, due to feedback forces from the main rotors back into the servos, e.g. from the flight forces).
- Stabilizer 1 - Pitch Servo
- Stabilizer 2 - Roll Servo
- Stabilizer 3 - Elevator Servo