3-Pole

Products 1-6 of 6
Show
90oz-in, Std, 3-pole ProModeler, reliable, high torque, digital servo, metal gears, dual ball bearings, water resistant, high voltage, servo for remote control models
Price: $29.99
View
Availability: In stock
ProModeler Item #: DS90DLHV -

The DS90DLHV is a high voltage (HV) digital servo built on a tough hybrid case of aluminum and plastic. Equipped with dual ball bearings and all-metal gears (for durability), it outputs 90 oz-in (+5 pounds of force) and has a transit time of 0.165sec/60° - it's what's called a standard-size servo. Standard size means it fits most .40-1.20 remote control model airplanes. Specs - useful if you're curious about the raw numbers, dimensions, etc. Comparison - a guide regarding how it compares to...

130oz-in, Std, 3-pole ProModeler, reliable, high torque, digital servo, metal gears, dual ball bearings, water-resistant, high voltage, servo for remote control models
Price: $34.99
View
(10)
Availability: In stock
ProModeler Item #: DS130DLHV -

The DS130DLHV is a high voltage (HV) digital servo built on a tough hybrid case of aluminum and plastic. Equipped with dual ball bearings and all-metal gears (for durability), it outputs 130 oz-in (+8 pounds of force) and has a transit time of 0.17sec/60°. This is what's called a standard-size servo - meaning it fits most remote control models. Competing with similar products from other manufacturers, the $30 price puts it in the middle of the pack. To help figure out whether these are the...

140oz-in, Std, 3-pole ProModeler, reliable, high torque, digital servo, metal gears, dual ball bearings, water-resistant, high voltage, servo for remote control models
Price: $44.99
View
(3)
Availability: In stock
ProModeler Item #: DS140DLHV -

You're looking at the DS140DLHV standard size digital servo. It operates on high voltage, is water resistant, and is fast as greased lightning! Best of all, it's priced to not break the bank and exists because of three nearly simultaneous conversations with customers. It all began when a fellow called seeking a fast servo for the throttle of his 40% Sukhoi. He'd had it a few months and the servo (not one of ours) had failed leaving him in a bad spot for the next 8 minutes of flight. As you...

180oz-in, Std, 3-pole ProModeler, reliable, high torque, digital servo, metal gears, dual ball bearings, water resistant, high voltage, servo for remote control models
Price: $39.99
View
(13)
Availability: In stock
ProModeler Item #: DS180DLHV -

The DS180DLHV is a high voltage (HV) digital servo built on a tough hybrid case of aluminum and plastic. Equipped with dual ball bearings and all-metal gears (for durability), it outputs 180 oz-in (+11 pounds of force) and has a transit time of 0.17sec/60°. This is what's called a standard-size servo - meaning it fits most remote control models. Competing with similar products from other manufacturers, the $40 price puts it in the middle of the pack. To help figure out whether these are the...

270oz-in, Std, 3-pole ProModeler, reliable, high torque, digital servo, metal gears, dual ball bearings, water resistant, high voltage, servo for remote control models
Price: $44.99
View
(2)
Availability: In stock
ProModeler Item #: DS270DLHV -

BATCH UPDATE 4/8/2019 While building the next batch of DS270 servos we discovered our PCB supplier had inadvertently flashed them with the wrong instruction set. Unfortunately, re-flashing them once we've broken the cards apart into individual boards for the servos is so labor intensive as to not be worth the time and effort (boards are about the size of a sheet of stamps and have similar perforations to crack into individual boards). The point being, they're basically...

360oz-in, Std, 3-pole ProModeler, reliable, high torque, digital servo, metal gears, dual ball bearings, water-resistant, high voltage, servo for remote control models
Price: $49.99
View
(14)
Availability: In stock
ProModeler Item #: DS360DLHV -

Smooth and powerful, the water resistant DS360DLHV is a high voltage (HV) digital servo built on a tough hybrid case, which is crafted of aluminum and engineering polymer plastic. Equipped with cooling fins for heavy duty use, the center-section is CNC-milled from a solid billet of 6061-T6 aircraft aluminum. Meanwhile, the electronics cover (bottom) and the transmission section (top) are injection molded of impact resistant fiber-filled Nylon 6,6 (like what's used for a Smith & Wesson handgun...